Amps
[Top] [All Lists]

[AMPS] FCC certification - how do they do it?

To: <amps@contesting.com>
Subject: [AMPS] FCC certification - how do they do it?
From: i4jmy@iol.it (i4jmy@iol.it)
Date: Thu, 27 Jul 2000 12:49:26 +0200
Not so easy, unfortunately.
An European directive is not yet a law and that directive is a sort of 
headline, incomplete with specific electrical parameters (numbers).
Until single governaments will not only accept that directive issueing 
a specific law (that's also an operative tool), the self certification 
procedure is not applicable.
Of course when there's no law there's also no penalty, and possibly the 
penalty occurs when manufacturer is not respecting the older but still 
acual law.
The situation is actually messing up things because the different 
countries governaments have different "speeds" and the directive is 
formerly accepted but not yet "working" everywhere.
(Another typical example of the european bureaucracy)
Personally, I think most manufacturers will continue anyway to delegate 
the so called "qualified competent bodyies" in order to certfy 
compliances of their product and thus dropping a large amount of their 
legal responsibilities.

73,
Mauri I4JMY

> ---------- Initial message -----------
> 
> From    : owner-amps@contesting.com
> To      : "'Jim Reid'" <kh7m@hsa-kauai.net>
> Cc      : amps@contesting.com
> Date    : Thu, 27 Jul 2000 08:12:19 +0100
> Subject : RE: Re: [AMPS] FCC certification - how do they do it?
> 
>Over here, under the new
> rules (the Radio and Telecommunication Terminals Equipment Directive 
of the EU),
> a manufacturer can self certify, but there's BIG penalties if he's 
found to have
> falsified the figures.
> 
> 73
> 
> Peter G3RZP




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>