[AMPS] Caveat on Dentron Filaments + MLA-2500B Notes

[Peter_Chadwick@mitel.com (Peter Chadwick)]

Not all the Dale type metal clad resistors are inductive - certainly over here,
there's a manufacturer who makes a non inductive variety. It uses Ayrton-Perry
winding. I have some of these rated 200 ohm, 50 watt, and when I  measured the
inductive component at 30 MHz, it was under j10 ohms i.e a Q of .05


73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com