Amps
[Top] [All Lists]

[AMPS] Caveat on Dentron Filaments + MLA-2500B Notes

To: <amps@contesting.com>
Subject: [AMPS] Caveat on Dentron Filaments + MLA-2500B Notes
From: W8JI@contesting.com (Tom Rauch)
Date: Tue, 1 Aug 2000 04:59:28 -0400
> Not all the Dale type metal clad resistors are inductive - certainly over
> here, there's a manufacturer who makes a non inductive variety. It uses
> Ayrton-Perry winding. I have some of these rated 200 ohm, 50 watt, and
> when I  measured the inductive component at 30 MHz, it was under j10 ohms
> i.e a Q of .05

Dentron used surplus resistors and other components from 
Electronic Surplus in Cleveland Ohio every chance they got.

The resistors were generally standard wire wounds.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>