Amps
[Top] [All Lists]

[AMPS] 2000 ARRL Handbook question

To: <amps@contesting.com>
Subject: [AMPS] 2000 ARRL Handbook question
From: 2@vc.net (measures)
Date: Thu, 3 Aug 2000 08:08:22 -0700
>Rich says:
>
>>>There was no great difference between them at VHF, but at HF the 
>>>nichrome had much lower Q (as would be expected).
>>>
>>EUR  Tom --  your theory that the resistance of nickel-chromium alloys 
>>Increases with a decrease in frequency is not supported by any published 
>>measurement.  
>
>
>Rich, you've lost me here. To me Q is (in this context) XL/r. Let's have r
>constant with frequency; XL increases with frequency. Therefore the Q of an
>inductor rises as the frequency goes up, doesn't it? And falls as the 
>frequency
>(i.e. XL) goes down.
>
In this case we have a parallel resistance and a series resistance.  
Things are more compicated than they look.   I seems to me that you need 
to look at the measurements.  

>Now if the material has a permeability other than 1, resistance will rise 
>as the
>frequency goes up, but Q will still drop as frequency goes down. Isn't 
>this what
>Tom said?
>
Beats me.  I had trouble making sense out of it.  

>If you put a resistor across the nichrome inductor, then the value that Q can
>reach is limited, and the parallel impedance is, in the limit, the value of
>parallel resistance.
>
?  ¿?
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>