>
>I would be nearly certain the problem
>is a "sticking" T/R relay. I had exactly the
>same symptom some months back; was
>cured by replacing the relay. Was very
>annoying at the time for sure! The relay over
>on the amp was the one hanging up.
>
When a DC relay hangs up, the problem could be residual magnetism in the
armature. This can usually be cured by reversing the wires to the coil.
later, Jim
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|