The Pride Amp is HF.
DA
-----Original Message-----
From: KB7WW Art Moe <kb7ww@chatusa.com>
To: D.Anderson <dla@theriver.com>
Cc: amp reflector <amps@contesting.com>
To: <amps@contesting.com>
Date: Friday, August 18, 2000 4:49 PM
Subject: Re: [AMPS] Pride amp
>I think you need to rethink your statement. I owned a Johnson 6&2
>amp at one time and it worked just fine with about 4 watts of drive,
>about 400 out at that drive level, but with 7 - 10 watts it did better
>about 700. Yes it is still on the air at some other hams location and
>the screen voltage has a better regulator. BTW it ran 4CX150 - 250's
>
>Was this not a HAM AMP?????
>Art
>KB7WW
>
>"D.Anderson" wrote:
>>
>> The Pride amp requires 4 watts drive. Ham radio amps require 100 watts. I
can
>> only think of one service with 4 watt drivers, CB...
>>
>> DA
>>
>> --
>> FAQ on WWW: http://www.contesting.com/FAQ/amps
>> Submissions: amps@contesting.com
>> Administrative requests: amps-REQUEST@contesting.com
>> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|