Amps
[Top] [All Lists]

[AMPS] Problem with SB-220 Bias Diodes

To: <amps@contesting.com>
Subject: [AMPS] Problem with SB-220 Bias Diodes
From: i4jmy@iol.it (Maurizio Panicara)
Date: Thu, 31 Aug 2000 20:32:44 +0200
But someone told a number 30 wire 1/2 inch long fuse didn't blow up ......
Jokes apart, there's another issue often neglected that's what happens to a
GG tube when HV disappear and drive power stay on. Someone who opened tubes
could explain it better than anyone else.

73,
Mauri I4JMY

----- Original Message -----
From: "measures" <2@vc.net>
To: <i4jmy@iol.it>; "AMPS" <amps@contesting.com>
Sent: Thursday, August 31, 2000 8:13 PM
Subject: Re: [AMPS] Problem with SB-220 Bias Diodes


> >True as a general issue, but in practice all depends by which diodes
> >and what's the peak duration/current involved. Evidently, 1N4005 are
> >not enough compliant with the general assumption if compared with a
> >larger power zener in the specific application.
> >But, at least, 1N4005 were fast enough to protect fuses.
> >
> The 1N4005s protected nothing, Mauri
>
> -  Rich..., 805.386.3734, www.vcnet.com/measures.
> end
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>