Amps
[Top] [All Lists]

[AMPS] Blown TL922A... What to do?

To: <amps@contesting.com>
Subject: [AMPS] Blown TL922A... What to do?
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Thu, 7 Sep 2000 10:40:28 +0100
Tom says:

>The anode systems are usually resonant far below the grid's 

The corollary to Tom's statement is that a tube with the anode parasitic circuit
resonant at a frequency below that of the grid parasitic circuit  will not
oscillate. See Terman's 'Radio Engineering'.

In this case parasitic suppressors aren't needed - for a QRO example, see the
Marconi H1500 of 1964, with its 3CX35000 in g-g. That had the grid in a collett
connected to ground, and no parasitic suppression necessary.

73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>