> 5. tin with 6% AG / 94% Sn silver solder and resolder. Add solder as
> needed.
> 6. remove solder flux residue with everclear or denatured ethanol.
> -- note - do not mix tin/lead solder with silver solder.
> cheers, Bill
>
> - Rich..., 805.386.3734, www.vcnet.com/measures.
> end
I've never heard this Rich, why not??? (the mixing of tin/lead and silver
solder) Unfortunately I know I've done this many times in the past....
Phil W2GE
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|