>
>
>> 5. tin with 6% AG / 94% Sn silver solder and resolder. Add solder as
>> needed.
>> 6. remove solder flux residue with everclear or denatured ethanol.
>
>
>> -- note - do not mix tin/lead solder with silver solder.
>> cheers, Bill
>>
>> - Rich..., 805.386.3734, www.vcnet.com/measures.
>> end
>
>
>I've never heard this Rich, why not???
Lead contamination supposedly decreases the flowability and strength of
silver solder.
> (the mixing of tin/lead and silver
>solder) Unfortunately I know I've done this many times in the past....
>
>Phil W2GE
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|