On Thu, 28 Sep 2000 13:07:06 +0100 Peter Chadwick
<Peter_Chadwick@mitel.com> writes:
>
>Does the SB220 have more than one choke in the plate
> - the usual shunt feed choke to the plate, and on the HV
>side of that choke, another one, in series to the HV?
Yes, the second choke is 8.5 uH; And it is bypassed at the supply
end with .001 uF.
>, with a bypass from the junction to ground?
Yes, .001uF there too.
> Or is the HV end of the plate choke just bypassed to ground?
> What is the value of the plate choke by the way?
50 uH
73,
Marv WC6W
*
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|