>
>Rich says:
>
>>At least two people have seen the 220's normal damped wave
>>ringing at 110MHz on a spectrum analyzer.
>
>How does one see that on a spectrum analyser?
With an approx. 30pps tuning pulser, one sees a virtually continuous
signal.
>Because it's not a continuous
>signal in the time domain, it's not the thing to look for with a spectrum
>analyser.
>
Only turkeys look for damped wave ringing without pulsing the anode
current. .
end
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|