Hello all,
I would like to rebuild the power supply/filter/rectifier board in my sb200,
but am having problems finding the filter caps. I know that Harbauch had
such a replacement, but he is not offering them at this time.
Would also like to replace the high voltage string of 3 resistors, but have
heard that more lower value resistors would be better than a few of higher
value.
One final thing...The swr input to the amp seems a little high on 15 and 10
meters. Can the input circuit be tuned, I had heard that one should not
fuss with this, or is there something else I might look at.
Thanks in advance for any advice or contact information.
73's
Mark, WT6P
Sacramento, CA
Mark Cherry
Senior Engineer
Quickstart Technologies
916.856.1500
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|