>
>How to set class operation either AB1 or AB2 for power tube triode, so in
>triode plate current directly determine by plate voltage. Should I keep the
>anode voltage regulated, and bias will be diffrent with diffrent anode
>voltage.
>
>I case for 304TL, for AB1
The 304TL is not suitable with AB1.
>and AB2 I was look in datasheet have the same
>value. I am litle bit confused here.
>
>
>Firson - YD1BIH
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>Share information about yourself, create your own public profile at
>http://profiles.msn.com.
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|