>From: measures <2@vc.net>
>To: <firson@Radiolink.net>, "AMPS" <amps@contesting.com>
>Subject: Re: [AMPS] Bias for Triode
To: <amps@contesting.com>
>Date: Fri, 20 Oct 2000 01:01:42 -0700
>
>
> >
> >How to set class operation either AB1 or AB2 for power tube triode, so in
> >triode plate current directly determine by plate voltage. Should I keep
>the
> >anode voltage regulated, and bias will be diffrent with diffrent anode
> >voltage.
> >
> >I case for 304TL, for AB1
>
>The 304TL is not suitable with AB1.
----------------------
In old ARRL Handbook (1969), in chapter Triode Transmitting tube Datasheet
still have 304TL employing for AB1.
-----------
>
> >and AB2 I was look in datasheet have the same
> >value. I am litle bit confused here.
> >
> >
> >Firson - YD1BIH
> >_________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> >Share information about yourself, create your own public profile at
> >http://profiles.msn.com.
> >
> >
> >--
> >FAQ on WWW: http://www.contesting.com/FAQ/amps
> >Submissions: amps@contesting.com
> >Administrative requests: amps-REQUEST@contesting.com
> >Problems: owner-amps@contesting.com
> >
> >
>
>
>- Rich..., 805.386.3734, www.vcnet.com/measures.
>end
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
>
>________________
>Email Forwarding Service Brought To You By: http://www.bn3.com.
>We can let you become anybody@anyplace.com. FREE, In 5 minutes!
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|