Amps
[Top] [All Lists]

[AMPS] Drive for 2x4-400A GG

To: <amps@contesting.com>
Subject: [AMPS] Drive for 2x4-400A GG
From: firson@Radiolink.net (Firson Maryutenli)
Date: Thu, 16 Nov 2000 14:55:07 JAVT
Hi All,
Now I currently building Amplifier for SSB 80 meter band using two Eimac 
4-400A tube in Grounded Grid Mode. I got problem from my tranceiver that is 
not enough power for driving this amplifier until full output. With 100 watt 
drive only produce 600 watt output and plate current are quiet low only 
indicating betwen 300 to 400 ma. I have no maching input (tune input) and 
tranceiver output directly connected to filamen. How to design maching input 
for this tube ? so I can drive this amplifier until full output for only 100 
watt drive.

Thanks in advance
Firson - YD1BIH
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>