[AMPS] Spark-plug gaps

To:	<amps@contesting.com>
Subject:	[AMPS] Spark-plug gaps
From:	2@vc.net (measures)
Date:	Thu, 23 Nov 2000 05:12:52 -0800

>Hi Group:
>
>    Yes get the feed line on the ground, a knife switch will not do it, don't
>let it into
>the shack.
>
>
AMEN, Ed..

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Spark-plug gaps, (continued) [AMPS] Spark-plug gaps, Tom Rauch [AMPS] Spark-plug gaps, measures [AMPS] Spark-plug gaps, Chuck Counselman [AMPS] Spark-plug gaps, Doug Hall [AMPS] Spark-plug gaps, Tom Rauch [AMPS] Spark-plug gaps, measures [AMPS] Spark-plug gaps, Edward Ewell [AMPS] Spark-plug gaps, measures [AMPS] Spark-plug gaps, Doug Hall [AMPS] Spark-plug gaps, measures [AMPS] Spark-plug gaps, measures <=

Previous by Date:	[AMPS] Hi Power Connectors, Peter Chadwick
Next by Date:	[AMPS] Voltage Output Circuit for Dummy Load, measures
Previous by Thread:	[AMPS] Spark-plug gaps, measures
Next by Thread:	(Fwd) Re: SV: [AMPS] ncl parts, George T. Daughters
Indexes:	[Date] [Thread] [Top] [All Lists]