Amps
[Top] [All Lists]

[AMPS] SB220 power output

To: <amps@contesting.com>
Subject: [AMPS] SB220 power output
From: 2@vc.net (measures)
Date: Thu, 14 Dec 2000 06:56:06 -0800
>
>Hi Rich,
>Where you are suppose to make the holes on the fan, exactly?
>73, Jaime EA6NB
>
Directly above the motor shaft, about 1cm in.  .  Do not drill deep.  Use 
c. #55 drill.  

>} -----Mensaje original-----
>} De: owner-amps@contesting.com [mailto:owner-amps@contesting.com]En
>} nombre de measures
>} Enviado el: Thursday, December 14, 2000 13:31
>} Para: Peter Chadwick; Amps List
>} Asunto: RE: [AMPS] SB220 power output
>} 
>} 
>} 
>} >
>} >Rich said:
>} >
>} >>The SB-220 has a clearly superior cooling system -- provided 
>} >>that the fan bearings are routinely oiled every 1000 or so hours.  
>} >
>} >What sort of bearings are they? 
>} 
>} Oilite
>} 
>} >I would have expected a plain bearing made from
>} >'oilite' to do a lot better than 1000 hours between oilings. 
>} 
>} For me, 1000 hours is several years of operating.  
>} 
>} 
>} cheers, Peter
>} 
>} -  Rich..., 805.386.3734, www.vcnet.com/measures.  
>} end
>} 
>} 
>} --
>} FAQ on WWW:               http://www.contesting.com/FAQ/amps
>} Submissions:              amps@contesting.com
>} Administrative requests:  amps-REQUEST@contesting.com
>} Problems:                 owner-amps@contesting.com
>} 
>} 
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>