[AMPS] Himu triode 4-400A distorsion products??

[2@vc.net (measures)]

>Rich says:
>
>       >With a 4-250A or 4-400A, it takes c. 75mA of ZSAC 
>       >for good linearity.  In order to obtain 75mA of ZSAC  
>       >with 0v bias, one needs c. 3500v.  
>
>Even then, you're pushing things to get more than about 400 watts out with
>reasonable linearity. In fact, nearer 4kV is better.
>
 common bandswitches can not handle 4kV safely.  
>
cheers, Peter 
>
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com