Amps
[Top] [All Lists]

[AMPS] K2RIW Amps

To: <amps@contesting.com>
Subject: [AMPS] K2RIW Amps
From: 2@vc.net (measures)
Date: Sun, 25 Feb 2001 08:03:55 -0800
>
>Arne Gjerning wrote:
>>
>>When I helped operate EME station at the 150 ft Stanford Univ dish in
>>the late 70's, the amp on 432 MHz was a RIW (2ea 4CX250B) and it read
>>900W out to a Bird wattmeter. I would not have believed it if I had not
>>seen it, but that is one super amp for 432.
>
>In class B or C with a lot of drive, you can indeed get that kind of
>power from a pair of 4CX250Bs - but that's CW, not linear.
>
>The practical limit for good linearity is about 500W in strict class AB1
>(ie zero g1 current).
>
>The Eimac data sheet for 4CX250Rs suggests more power is available...
>but look how the linearity suffers!
>
I ran a pair of paralled 4cx250Rs on 2m SSB.  The tank was 1/4 wave.  
With a screen current of c. 5mA (@400screen-v), the linearity was good. 
Output was c.900w PEP on SSB. 10w drove it.  

cheers

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>