To: | <amps@contesting.com> |
---|---|
Subject: | [AMPS] 4-1000A Project |
From: | k1ta@contesting.com (Bob Marston) |
Date: | Tue, 03 Apr 2001 22:51:28 -0700 |
Jon Ogden said: > STAY AWAY from the B&W 801 switch assembly. Lots of guys and old assembly > diagrams say it is for the 4-1000. It's not I used it and wish I didn't. Hmmmmmmm the B&W 800 and 802 are plate chokes The tank coil assemblies that include a band switch that were manufactured by B&W are the 850 and 852. Seems to me I recall a couple of years ago that someone queried the list this matter and I pointed out the 850 was designed to be used for a plate impedance one would expect to find with approximately 6kv and the 852 was set up for approx 3 kv. Then you jumped on the list in your normal half cocked fashion crowing about how YOU got the 850 to work at the lower voltage. Now you say that you wished you had not used it. WELL which is it Jon ???? Were you wrong then or are you wrong now ? -- FAQ on WWW: http://www.contesting.com/FAQ/amps Submissions: amps@contesting.com Administrative requests: amps-REQUEST@contesting.com Problems: owner-amps@contesting.com |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [AMPS] QB5/1750 russian equiv., yo9fzs |
---|---|
Next by Date: | [AMPS] 4-1000A Project, paul |
Previous by Thread: | [AMPS] 4-1000A Project, paul |
Next by Thread: | [AMPS] 4-1000A Project, Jon Ogden |
Indexes: | [Date] [Thread] [Top] [All Lists] |