Subject: [AMPS] Floating Ground
>
> Why floating ground (ground and negative separated between 50 ohm resistor)
> always use in modern HV Power Supply,
So that the plate current meter can be placed in the B- line
instead of running HV through it.
>
> And why in stand by mode, tube also biasing for cut off voltage, and why not
> cutting off cathode from negative..
Cutting the tube off during standby eliminates a lot of heat.
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|