-----Original Message-----
From: Radio WC6W <wc6w@juno.com>
To: g8gsq@qsl.net <g8gsq@qsl.net>; amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 14 April 2001 17:42
Subject: Re: [AMPS] Zener screen supplies
>
>On Thu, 12 Apr 2001 09:13:55 +0100 "Steve Thompson" <g8gsq@qsl.net>
>writes:
>
>Hello Steve & the group,
> I finally got a moment to read all this screen mail...
>
> The original query was about how to protect a "string of zeners" shunt
>regulator.
>
> One answer is with a SCR crowbar across the zeners, to which Ian
>mentioned a reference (which I haven't seen) & then alluded to other
>circuitry.
>
> Triggering may be simply implemented by connecting the gate of the
>crowbar SCR to a small value R in series with the bottom of the zener
>string. So, in this case, the other circuitry is a single R.
That seems like a neat idea. KISS too.
Steve
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|