Have a look here....
http://www.dalek.org/srg/cavity.html
You can also e-mail this fellow with questions...
73
Jim W7RY
----- Original Message -----
From: <conrad.farlow@virgin.net>
To: "AMPS" <amps@contesting.com>
Sent: Saturday, May 19, 2001 6:08 PM
Subject: [AMPS] VHF/UHF cavity design
>
> I am looking for a source of the finer points of cavity design for 144 and
> 432 Mhz. I am aware of some of the design criteria but I would like to
know
> more. Can anyone recommend some reading or better still is there anyone
out
> there with design experience who is not too busy to help an inquisitive
soul
> like me?
>
> Are there any excel spreadsheets available like there are for Pi Tanks?
>
> Any help gratefully accepted. I want to design something myself for a
change
> and not just copy an existing design. I would be interested in speaking to
> anyone who has a YC-156 or 3CPX5000A7 on 2m in a half wave cavity on
144Mhz.
> I know that there are a few people out there using this tube so........
>
> I have definitely decided to use a 1/2wl anode cavity, I have found them
> superior to striplines in my experience.
>
> Any help would be gratefully received.
>
> Regards
>
> Conrad Farlow G0RUZ
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|