Correction.
I left out the fact I used one ampere of load current in the example
below:
> > Kurt,
> > There is full info on modelling voltage doublers on the Duncan amps
> > = site. You do not have to download and store, you can simply open
> > the site and = do the exercise
>
> I didn't seem to be able to do that Barry. I had to download the file.
>
> I could only run the bridge rectifier program, and it very clearly
> gave me incorrect answers.
>
> In one example I modelled a full wave rectifier with 20 ohms ESR (the
> maximum it allows) with 2600 volts at the transformer, and it said
> 3600 volts dc output. That is clearly incorrect.
73, Tom W8JI
W8JI@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|