That isn't the problem being described Carl.
The tubes arced, and the diode that protects the meters is now
shorted.
> The first place I would look is the coax,cable from the ant. relay to
> the output connector. I fought an amp , (not an al811) sometime back
> for quite some time before I decided to look in that area. It isn't
> the only place , maybe but it is one of many, and it's just not too
> obvious either!!!!! disconnect the rf choke on the output side and
> measure from the output connector to ground.have fun!!!!
> carl / kz5ca
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|