Amps
[Top] [All Lists]

[AMPS] Re: 3-500Z emission saturation

To: <amps@contesting.com>
Subject: [AMPS] Re: 3-500Z emission saturation
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Tue, 09 Oct 2001 17:11:38 -0500
The same person that is the subject of this:
>
>1.) On one hand, claims are made by a certain person a parasitic 
>can cause enough anode current to "bend filament wires from 
>magnetic fields". 
>
>2.) On the other hand, the same person claims he "starts to see 
>current saturation at 420 mA".
>
>
This is the same person that believes that low distortion is a bunch of hog
wash- witness this quote:

>//  The FCC's Paragraph D says that splatter in a ham-band should not go 
>beyond the band edges, so why make ham stuff as clean as possible?  

And- who will not furnish the references to back up some of the libel he
spouts.

Bill-W4BSG
>

-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>