> >I'm building another power supply for my amplifier
> >project. I originally set out to use a capacitor
> >input design commonly used but have since (tonight)
> >found a large (13H) choke. I was told by the OM that
> >I got it from that I could probably put it in the CT
> >lead and not have to worry about any spark gap
> >procedures.
Back in the "olden days" it was common to see chokes
installed in the B- that lacked the insulation to be placed
on the B+ side. Worked just as well there, but as Rich said,
you are probably not going to like the regulation on SSB.
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|