>
>Jerry said:
>
>>as I can Make the forms from PVC Pipe
>
>PVC isn't the best material for the job: if you can get some fibreglass,
>that's much better - less loss.
ABS has a lower Dissipation factor than PVC . G10 and G11
epoxy-fiberglass have a low D factor. Source of G10 and G11 tubing:
Plastifab,1425 Palomares, La Verne, CA 91750 818 967 9376. Such tubing
is not cheap but is strong, easily cut and good around HV RF.
>...
cheers, Peter
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|