Amps
[Top] [All Lists]

[AMPS] MLA 2500B

To: <amps@contesting.com>
Subject: [AMPS] MLA 2500B
From: w6ru@bak.rr.com (Terry Gaiser)
Date: Sat, 24 Nov 2001 12:37:29 -0800
Sound like to me the 10 meter "trap" has not been removed from the input
coax.

Terry W6RU

----- Original Message -----
From: "Gerald Smith" <w6ter@worldnet.att.net>
To: <amps@contesting.com>
Sent: Saturday, November 24, 2001 10:02 AM
Subject: [AMPS] MLA 2500B


>
> I have the subject amp (on loan). Doesn't work on 10 meters. Check the
> band switch and, in-fact, there is a wire from the 10 meter position to
> the tank circuit (minimum L). It exhibits very low output (with lots of
> drive) on 10 and the impedance to the xcvr is way off (high swr). Any
> thoughts?
>
> On other bands, reasonable output (900 - 1000 watts). However, the match
> to the xcvr is only OK on 20 meters. The other bands (160, 80, 40, 15)
> have some SWR to the xcvr (mis-match). Since this is not a tuned input,
> what can be done to match the input?
>
> Gerry, W6TER
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>
>



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>