Dear Carl:
My Viking Thunderbolt gave 38 years of solid service with Roller inductor in
final tank. The main thing is to keep it clean and snug to prevent arcing.
Once arcing starts, it should be dealt with immediately. Otherwise, the cure
becomes more difficult.
73, Joe
carl seyersdahl wrote:
> does anyone here have experience with amps that use a roller inductor in
> the plate ckt. .. I'd like to know just how good or effective that type of
> ckt. is compared to the "old reliable" pi-network ckt.I'm curious about the
> good versus the bad qualities of each.!! Anyone care to comment???
> thanks
> carl / kz5ca
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|