If you consult your 1930 ARRL Handbook you would learn that one CTs a
filament transformer with Xmas tree lights in series, hi!
73
end
Barry Kirkwood PhD ZL1DD
Signal Hill Homestay
66 Cory Road
Palm Beach
Waiheke Island 1240
NEW ZEALAND
www.waiheke.co.nz/signal.htm
----- Original Message -----
From: Rich... <2@mail.vcnet.com>
To: AMPS <amps@contesting.com>
Sent: Sunday, February 03, 2002 5:04 PM
Subject: Re: [AMPS] Filamant CT
>
> The filament transformer I am using with an 811A amp
>has no CT for the B- return, so I just tapped one side of the
>filament. Is this a good idea or am I asking for a hum problem
>here. If I make a CT can I use a couple of 2 to 5 watt 20-200 ohm
>resistors ?? Thanks
>
- 2, 3 - 5 ? resistors in series would provide a C.T. with less DC g-k
bias change due to cathode I x R/2 drop.
cheers, Ed
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|