>
>> >Tuners need only a reflectometer to indicate when zero reflected
>> >power is obtained during adjustment.
>>
>> Generally speaking, I agree with Rich. However, some tuner circuits
>> can be tuned up to have a very low input SWR and no output, with the
>> tuner losses being transformed up to 50 ohms. The result is that the
>> smoke gets let out of the tuner parts - or the solder out out of the
>> joints! Of course, these tuners can also be tuned to have a very low
>> input SWR because they're doing the job correctly.
>
>
>I hear that rumor repeated, but I've never been able to find that in
>any tuner I have ever seen.
>
? Amen, Tom
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|