Amps
[Top] [All Lists]

[Amps] IMD vs. Vcc

To: <amps@contesting.com>
Subject: [Amps] IMD vs. Vcc
From: w6ru@bak.rr.com (Terry Gaiser)
Date: Mon, 1 Apr 2002 07:42:29 -0800
http://wireless.fcc.gov/rules.html


----- Original Message ----- 
From: "Richard" <2@mail.vcnet.com>
To: "Roger D. Johnson" <n1rj@pivot.net>; "AMPS" <amps@contesting.com>
Sent: Monday, April 01, 2002 7:17 AM
Subject: Re: [Amps] IMD vs. Vcc




>?  As long as rotten splatter doesn't go outside the band, it is not 
>against the Part 97 rules.  
>
>Not True! See Part 97 - section 307a
>
?  I have an old copy of 97, but paragraph D defines excessive splatter 
as that which is outside the amateur radio band in use.  If an AM signal 
can legally be 12kHZ wide, so can a SSB, DSB or an FM signal.  W6CHR's 
G2DAF amp was several times wider than 12kHZ and he was never cited.
-  Is part 97 available on the Web ?

cheerz, Roger

-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




<Prev in Thread] Current Thread [Next in Thread>