Marv,
Thanks for that information ... if you go back to my original question
.......
>Tom,
>Where is A3J specified as 3 KHZ please ?
>Terry W6RU
>> Second, you can not cause harmful QRM outside of the normal
>> occupied bandwidth allocated for that mode. (A3J means 3kHz
>> wide)
>> 73, Tom W8JI
J3E does NOT specify 3 khz. The point I was trying to make is that the
bandwidth spec (3K00 or 2K70)
has to be with the emission type to show the bandwidth of that mode.
Enough of this .... Tom has had no reply to my question.
Terry W6RU
----- Original Message -----
From: "Radio WC6W" <wc6w@juno.com>
To: <w6ru@bak.rr.com>; <amps@contesting.com>
Sent: Wednesday, April 03, 2002 7:39 AM
Subject: Re: [Amps] IMD vs. Vcc
>
> On Mon, 1 Apr 2002 21:56:31 -0800 "Terry Gaiser" <w6ru@bak.rr.com>
> writes:
> > Marv,
> >
> > Thanks much for pointing out where the "real" information is ...
> although
> > "A3J" is nowhere to be found ... here is the text for SSB (supressed
> > carrier) transmission:
>
> <snip>
>
> >
> > Terry W6RU
>
> Hi Terry,
> The radio lawyers changed those designators about... 8? years ago.
>
> So, A3J is now called J3E.
>
> 73 & Good morning,
> Marv WC6W
>
>
>
>
>
>
>
>
> *
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
|