Amps
[Top] [All Lists]

[Amps] Re: Negative grid current fixed

To: <amps@contesting.com>
Subject: [Amps] Re: Negative grid current fixed
From: 2@mail.vcnet.com (Richard)
Date: Thu, 4 Apr 2002 10:22:37 -0800
>I have been working on a tetrode amp which was slow to generate power
>and varying
>input swr and signs of negative grid current.
>
>  Last nite, I removed all input circuit components and then started
>over.  The first component reinstalled was the 50 ohm input resistor. I
>was working with no voltages applied and continued building the circuit
>one component at a time.  Everyting was stable.  I changed the value of
>the coupling/dc blocking capacitor to a 1200pf mica.
>The circuit now consists of  first feeding the resistor, then coupling
>the resisual voltage to the grid.  The negative bias is fed directly to
>the grid via a 50uh inductor.  All is well.
>
>   As far as the original problem?  I really cant say, except  I suspect
>the coupling/blocking capacitor was the culprit...
>
>    I still have to bypass the meters, but the operation is now stable.
>
>  Thanks to all who have helped with their input.
>
Thanks for the good news,  Lynn.

-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Re: Negative grid current fixed, Richard <=