[Amps] Solid State HF amps and kits

To:	<amps@contesting.com>
Subject:	[Amps] Solid State HF amps and kits
From:	philk5pc@tyler.net (Phil Clements)
Date:	Thu, 18 Apr 2002 19:59:34 -0500

One of the dead give-aways on a S.S. amp
is the band switch and the low-pass filters
for each band. You need at least 6 filters
in the output to cover all nine bands.
Even a "single-bander" needs an L/C filter
in the output to even come close to meeting
type-acceptance standards.

(((73)))
Phil, K5PC

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Solid State HF amps and kits, (continued) [Amps] Solid State HF amps and kits, WYsixK [Amps] Solid State HF amps and kits, Jim Strohm [Amps] Solid State HF amps and kits, WYsixK [Amps] Solid State HF amps and kits, Jim Strohm [Amps] Solid State HF amps and kits, Ron [Amps] Solid State HF amps and kits, WYsixK [Amps] Air gap for 12000 volts?, WYsixK [Amps] Air gap for 12000 volts?, Bob Sullivan [Amps] Air gap for 12000 volts?, Ron [Amps] Solid State HF amps and kits, Don Havlicek [Amps] Solid State HF amps and kits, Phil Clements <= [Amps] Solid State HF amps and kits, Jim Strohm [Amps] Solid State HF amps and kits, Phil Clements [Amps] Solid State HF amps and kits, <dick.knol@planet.nl (Dick Knol) [Amps] Solid State HF amps and kits, Vic Rosenthal [Amps] Solid State HF amps and kits, Jim Strohm [Amps] PI net question..., Bill Coleman [Amps] Recommendation?, Steve Katz [Amps] Recommendation?, Steve Katz [Amps] Recommendation?, Peter Chadwick

Previous by Date:	[Amps] Solid State HF amps and kits, Don Havlicek
Next by Date:	[Amps] CB amps on e-Bay, wlfuqu00@uky.edu
Previous by Thread:	[Amps] Solid State HF amps and kits, Don Havlicek
Next by Thread:	[Amps] Solid State HF amps and kits, Jim Strohm
Indexes:	[Date] [Thread] [Top] [All Lists]