Richard escribió:
>
> >Conrad, why not use the Motorola MR-760 diodes. They
> >are 1000 volts at 6
> >amps. They mainly high pot around 1.5KV They sell for
> >around .75 at Digikey.
> >Put some matched resistors and matched capacitors and it
> >will be bomb proof
> >for everything but HV to gnd short.
>
> ? Put "equalizer" resistors/capacitors on a string of same-type Si
> rectifiers and one increases the chance of failure.
Please, can you tell why?
TIA
Guillermo.
> >
> >Denis Ve6AQ
> >
> >Conrad G0RUZ wrote:
> >
> >> Has anyone ever used the P600M diode in an HT supply, it looks like a good
> >> choice, twice the current rating of the 1N5408. Any other recommendations
> >> for a bomb proof rectifier stack? I was thinking of using 8 per leg in my
> >> test supply which can do 5kV @ 1.75 amps.
> >>
> >> Conrad G0RUZ
> >>
> >> _______________________________________________
> >> Amps mailing list
> >> Amps@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/amps
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
> >
>
> - R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
> www.vcnet.com/measures.
> end
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|