Amps
[Top] [All Lists]

[Amps] P600M diodes in HT supplies

To: <amps@contesting.com>
Subject: [Amps] P600M diodes in HT supplies
From: 2@mail.vcnet.com (Richard)
Date: Tue, 30 Apr 2002 23:11:30 -0700
>Richard escribió:
>> 
>> >Conrad, why not use the Motorola MR-760 diodes.  They
>> >are 1000 volts at 6
>> >amps. They mainly high pot around 1.5KV  They sell for
>> >around .75 at Digikey.
>> >Put some matched resistors and matched capacitors and it
>> >will be bomb proof
>> >for everything but HV to gnd short.
>> 
>
>> ?  Put "equalizer" resistors/capacitors on a string of same-type Si
>> rectifiers and one increases the chance of failure.
>
>Please, can you tell why?

?  Because diodes ordinarily have differing Peak Inverse Voltages, if the 
equalizer resistors try to force the same V across each diode, the lowest 
PIV diode can be subjected to more PIV than it can safely handle.  For 
example, two diodes rated at 1000PIV are connected in series.  An 
equalizer resistor is connected in parallel with each diode.  The 
measured PIV (avalanche V) of one diode is 1000V and the other is 1600V.  
An inverse voltage transient of 2400V comes along.  Each diode receives 
c. 1200V due to the equalizers. The 1000PIV diode will fail/short, which 
in turn puts 2400V on the 1600V diode, which then shorts, much like 
dominoes falling.  However, without the equalizer resistors, because the 
currents in a series circuit are always (=), the PIV will divide 
according to the avalanche V of each diode.  Thus, the V on the 1000V 
diode will limit at c. 1000V and the remaining 1400V will appear across 
the 1600V diode.  So, neither diode is torpedoed by the 2400V transient.

cheers, Guillermo.
>
>> >
>> >Denis Ve6AQ
>> >
>> >Conrad G0RUZ wrote:
>> >
>> >> Has anyone ever used the P600M diode in an HT supply, it looks like a 
good
>> >> choice, twice the current rating of the 1N5408. Any other recommendations
>> >> for a bomb proof rectifier stack? I was thinking of using 8 per leg in my
>> >> test supply which can do 5kV @ 1.75 amps.
>> >>
>> >> Conrad G0RUZ
>> >>
>> >> _______________________________________________
>> >> Amps mailing list
>> >> Amps@contesting.com
>> >> http://lists.contesting.com/mailman/listinfo/amps
>> >_______________________________________________
>> >Amps mailing list
>> >Amps@contesting.com
>> >http://lists.contesting.com/mailman/listinfo/amps
>> >
>> 
>> -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
>> www.vcnet.com/measures.
>> end
>> 
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end


<Prev in Thread] Current Thread [Next in Thread>