>>Anyone interested in about 100 pounds of new Mil-Spec 120/240V primary,
>>2800V (rectified & filtered) at .85A continuous duty? Also
>>conservatively rated at 1.3A for 30 minutes. Includes a tap for 335V
>>@110 mA.
>>Mark Moon
>>N3AVA/0
>>Cedar Rapids, IA
>>N3AVA@arrl.net
>
>Just 2800 volts?
2800v with a FWD is c. 7kVdc -- virtually ideal for an 8166/4-1000A on
SSB. for CW and RTTY, a FWB is good. See Figure 3 on my Web site for a
dual-V SPST-switchable FWD/FWB circuit.
>Frankly, it would be a whole lot more interesting if it
>were bridgeable to around 5kv.
>
>Is it a 1400-0-1400 xfmr or ?? The tap implies a ct, but can the ct float?
>
>I need 5kv. 8-)
>
>Bill K2AME
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|