Hi David,
>From what I understand they do need to be de rated like a photo flash capacitor
does. I can't remember by how much they should be de rated but I think it is in
the order of 40% ??
You might check on of the capacitor manufacturers web sites. They may tell you
there.
73
Gary K4FMX
David Smith wrote:
> Turns out that this capacitor is from an HP defibrulator.
>
> There seems to be a question about whether a defib cap can handle continuous
> PSU filter duty. It may need to be derated.
>
> Any comments?
>
> Regards,
> David Smith
> VK3HZ
>
> > From: "David Smith" <vk3hz@wia.org.au>
> > To: <amps@contesting.com>
To: <amps@contesting.com>
> > Date: Sat, 29 Jun 2002 21:31:34 +1000
> > Subject: [Amps] Filter Capacitors - Oil Filled vs. Electrolytic
> >
> > I'm on to building the HV PSU for the 8877.
> >
> > I have 2 alternatives for filtering - a used but good 54uF 4.2kV
> oil-filled
> > Maxwell or a string of 10 new 470uF 450V electrolytics (with 45K 10W
> > equalisers). They work out to roughly the same cost.
> >
> > I'm tending towards the oil-filled cap because it simplifies construction.
> > Any comments on either? I've seen comments here regarding equalising
> > electro strings and also read things about forming them. Do oil-filled
> caps
> > go off over time? Is it OK to mount them on their side?
> >
> > Regards,
> > David Smith
> > VK3HZ
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|