Amps
[Top] [All Lists]

[Amps] Nice big Plate transformer fs

To: <amps@contesting.com>
Subject: [Amps] Nice big Plate transformer fs
From: norsan@bright.net (Norman Hockler)
Date: Sat, 20 Jul 2002 13:27:56 -0400
Im willing to bet it does not say 4620KV     I will believe it says 4620V

Norm N8NH


At 12:41 PM 7/20/02 -0400, you wrote:
>all i know about it , it that it works and that is what  is written on it. 
>It was removed from a working 6 meter transmitter.
>chris NI4L
>
>wwd@netheaven.com wrote:
>
>>Steve Katz <stevek@jmr.com> said:
>>
>>>Still, 4620kv @ 750mA is nothing to sneeze at.  Isn't that 3-1/2 million
>>>VA?
>>
>>>-WB2WIK/6
>>
>>>>>I have a really nice BIG transformer. GE model 81g45 rated 1.1KVA. 
>>>>>115v in 4620kv@750miliamps center tap.
>>>>So the ct cannot float .  .  .  Boring, cheezy xfmr. Not even 230vac.
>>>>
>>>>Sorry about the bad review, but what do you expect from GE anyway.  <g>
>>
>>AFAIK, the seller has not chimed in with any more data. My suggestion
>>would be to leave it IN the microwave, remove the rotating platter, and
>>build up a nice final of proper proportion. The digital interface might be
>>rather useful, too.
>>
>>Bill    K2AME
>>
>>
>>
>>
>>
>>~~~~ trim, trim, trim, trim, trim, trim, trim, trim .  .  .
>>
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>>
>
>--
>NI4L CUSTOM RESONANT DIPOLE
>LEGAL LIMIT ++ CUSTOM MADE CENTER FED DIPOLE
>Made with the same components used by our military forces today
>Custom made to YOUR FREQUENCY of operation
>Let me take the hassle out of making a RESONANT DIPOLE for you.
>Click here for more info...  http://www.angelfire.com/nb/ni4l/
>
>
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>---
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps



<Prev in Thread] Current Thread [Next in Thread>