[Amps] EIMAC Confusion

To:	<amps@contesting.com>
Subject:	[Amps] EIMAC Confusion
From:	mark@sandlabs.com (mark)
Date:	Tue, 12 Nov 2002 22:18:48 -0500

In the EIMAC Technical Data for the 8877/3cx1500A7
is is stated in the ABSOLUTE Ratings the Plate Dissipation
is 1500W. I take this as an ABSOLUTE MAX.

However in the TYPICAL Operation at 88-108MHz USEFUL POWER OUTPUT
is rated at 2600W.

Is this meaning that the tube is providing 2600W to the load while plate
dissipation
is only 1500W? Is this possible ? If so What is then the TOTAL TUBE
DISSIPATION
and how is the filament power related to it ?

Mark

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] 4-400A Plate, (continued) [Amps] 4-400A Plate, Rich [Amps] 4-400A Plate, Peter Chadwick [Amps] 4-400A Plate, mark [Amps] 4-400A Plate, Peter Chadwick [Amps] 4-400A Plate, mark [Amps] 4-400A Plate, Bill Fuqua [Amps] Re: 4-400A Plate, Jan Erik Holm [Amps] 6m, mark [Amps] 6m, Jim Reid Message not available [Amps] 6m, mark Message not available [Amps] EIMAC Confusion, mark <= [Amps] 4-400A Plate, Rich [Amps] 4-400A Plate, Rich

Previous by Date:	[Amps] 6m, mark
Next by Date:	[Amps] Svetlana super tube GU-36B-1 for sale, R.Vaicius@omnitel.net
Previous by Thread:	[Amps] 6m, mark
Next by Thread:	[Amps] 4-400A Plate, Rich
Indexes:	[Date] [Thread] [Top] [All Lists]