[Amps] chain/sprocket

Amps

[Amps] chain/sprocket

To:	<amps@contesting.com>
Subject:	[Amps] chain/sprocket
From:	gjerning at flash.net (ARNE GJERNING)
Date:	Sat May 10 13:43:02 2003

Been looking for small sprocket/chain for ganging switch in amp project.  I
remember seeing info in an article but can not find it.  Would appreciate
info for possible supplier(s).   For .25 inch shafts and reduction to
sequence 36 deg to 30 deg detents.  Gear method not feasible.

73 de Arne N7KA

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] chain/sprocket, ARNE GJERNING <= [Amps] chain/sprocket, Floyd Sense [Amps] chain/sprocket, PAUL HEWITT [Amps] chain/sprocket, Kenneth D. Grimm, K4XL [Amps] chain/sprocket, ZL2AAA [Amps] chain/sprocket, rcm Fw: [Amps] chain/sprocket, skipp isaham [Amps] transformer CCS, kenw2dtc [Amps] chain/sprocket, Dave Bowker

Previous by Date:	[Amps] Protecting the control grid of a tetrode, Bill Coleman N2BC
Next by Date:	[Amps] chain/sprocket, Floyd Sense
Previous by Thread:	[Amps] Protecting the control grid of a tetrode, Bill Coleman N2BC
Next by Thread:	[Amps] chain/sprocket, Floyd Sense
Indexes:	[Date] [Thread] [Top] [All Lists]