Easiest to use a splitter/combiner. Otherwise, I believe you will have a lot
of tricky cable measuring to do.
George K. Watson
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of JimMoci@aol.com
Sent: Monday, January 19, 2004 8:54 AM
To: amps@contesting.com
Subject: [Amps] Power combiners and antennas???
Hello fellow amp gurus- I have a question for the experts. I have two TE
systems 350 watt 2 meter solid state amplifiers and wanted to combine the
two.
What is the best way of doing this? Should I use a power combiner? Should I
run
each amp into a seperate antenna with equal feedline lengths while driving
both
with the exciter simultaneously? Any other ideas, suggestions? Thanks for
any and all input.
73,
Jim
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|