On Sat, 06 Mar 2004 06:48:24 -0500, Ed Briggs wrote:
>I can't find the point of the arc.
_________________________________________________________
My instinct tells me it's the tube. There may be some loose pieces of
crud floating around inside. Try removing the tube and cycling the amp
on and off a number of times to see if it still arcs.
I had an AL-1200 years ago where the tube blew, but it wasn't
intermittent - it blew in no uncertain terms. Ameritron replaced the
tube under warranty.
--
Bill, W6WRT
QSLs via LoTW
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|