Clay -- The fly in the pie is that the stock, variable 150pF Tune-C has
too much minimum-C for 50MHz operation. To fix this problem, one needs
a 5 - 25pF unit -- which isn't going to have enough C below c. 21MHz.
On Oct 4, 2004, at 6:49 PM, Clay W7CE wrote:
Has anyone every converted a Kenwood TL-922A to work on 6M rather than
10M?
My TL-922A has never had the 10M conversion done and I'm considering
trying
a conversion to 6M for that position on the band switch (I still want
160M-15M). Looking at the schematic and some of the SB-220 conversion
notes
that I've seen, it looks like it should be pretty straight forward. If
anyone has tried this, please let me know how it worked and if there
were
any conversion issues.
Thanks,
Clay W7CE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|