Thanks Bill. I'll check out the ARRL handbook and do the calculations to
see if I can come up with a matching network that will handle 160-15M as
well as 6M. I guess my other other option is to look for an SB-1000 or
SB-220 that I could convert to 6M only. I like the TL-922A too much to
convert it for 6M only.
Clay W7CE
----- Original Message -----
From: "Bill Turner" <dezrat1242@ispwest.com>
To: "Clay W7CE" <w7ce@curtiss.net>
Cc: <amps@contesting.com>
Sent: Wednesday, October 06, 2004 10:50 AM
Subject: Re: [Amps] Kenwood TL-922A on 6 meters?
> On Wed, 6 Oct 2004 10:36:31 -0700, Clay W7CE wrote:
>
> >Interesting idea Bill. Is your SB-1000 converted for 6M only now or did
you
> >retain 160-15M? If the latter, did you have to short out the new coil or
> >move any of the coil taps for 160-15M operation?
> >
> >Clay W7CE
>
> _________________________________________________________
>
> It's for six meters only. I removed all the coils and bandswitch.
>
> As for shorting out the L-network coil, the ARRL handbook states this
> is generally not necessary because its effect becomes smaller as the
> frequency is lowered. I haven't verified this myself, but it sounds
> reasonable.
>
> --
> Bill W6WRT
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|