Amps
[Top] [All Lists]

Re: [Amps] SB-220 parasitic suppressors

To: "K7RDX" <k7rdx@earthlink.net>
Subject: Re: [Amps] SB-220 parasitic suppressors
From: R.Measures <r@somis.org>
Date: Wed, 3 Nov 2004 22:21:23 -0800
List-post: <mailto:amps@contesting.com>

On Nov 3, 2004, at 4:02 PM, K7RDX wrote:


Vic is absolutely correct about resistors changing value due to
heat/age/mistuning,etc. Another way to tame especially squirrly amps is to
add a supressor to the cathode side in addition to the usual anode ones. I
read somthing about that idea several years ago and found it effective in
taming my pair of 4-1000`s when running 6700vdc. My hf GS-35b AMP has a
supressor only in the cathode and has been super stable for the last four
years.....AL-1500 Owners might give that one a try.

A GS-35b has 0.12pF of anode-cathode feedback C. An 8877 has 0.10pF of it, so they have a fairly similar amount of internal feedback. Our 8877 low VHF-Q parasitic suppressor retrofit kit has both an anode suppressor and a cathode suppressor. It comes with a money back guarantee. So far, the only refund has been to a guy who said he did not know how to solder.
-- Today's trivia question: At its max freq of 1000MHz, what is the reactance in ohms of the output/input feedback path in a (g-g) GS-35b?


Parasitic discussion
sure brings out the pros&cons as well as the snake oil guy(s.)......Jim
K7RDX
----- Original Message -----
From: "Vic Rosenthal" <vic@rakefet.com>
To: "Amps reflector" <amps@contesting.com>
Sent: Wednesday, November 03, 2004 2:04 PM
Subject: [Amps] SB-220 parasitic suppressors


One reason that an SB-220 can develop VHF parasitics is the following:
the
original suppressors use 2-watt carbon composition resistors. These
resistors
tend to increase in value when they age, and especially when they are
heated.
If an SB-220 has been used heavily, especially on 10 meters or -- worst
case --
on 10 (or 11!) meter AM, the resistors will have gotten quite hot and may
have
changed significantly in value, or even opened up.

If the resistors are discolored, they should definitely be replaced.

--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps



Richard L. Measures, AG6K, 805.386.3734. www.somis.org


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>