Using "toaster wire" is a sure way to drive down that VHF-Q!
(It's not a bolt-on deal, however)
hal
> One other factor not mentioned is the Q of the VHF circuit, which
> has
> a great effect on gain. If the VHF Q is very high, oscillations
> are
> almost guaranteed. VHF Q is usually not known in most amplifier
> circuits, and having a parasitic suppressor circuit is just added
> insurance. I wouldn't be without one.
>
> --
> Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|